Seal-All is the adhesive mechanics and hobbyists trust for all their automotive and garage repairs. It adheres with superior strength to most substrates and resists gasoline, oil, paint thinner and most solvents.

• Fast dry time set in 10-12 minutes
• E-Z flow formula
• Gas & oil resistant
• Water resistant bond remains secure even when exposed to water
• Abrasion resistant
• Temperature resistant remains tough even in extreme temperatures

INSTRUCTIONS

Read directions and test small area before use. Hold tube upright until ready to use.
USE AS A CONTACT ADHESIVE: Spread coating on each surface to be joined together. Allow to cure 2 minutes before mating surfaces. Seal-All hardens by solvent evaporation and forms an immediate bond that is difficult to reposition after both adhesive coated surfaces are placed in contact and sufficient pressure is exerted to create full contact between both surfaces.
DRY TIME: 10 12 min. (set); 5-8 hrs. (full cure).
TEMPERATURE RANGE: -40 to 150 F (-40 to 66 C).
UV RESISTANCE: Paint over for maximum resistance.
CHEMICAL RESISTANCE: Resistant to gasoline, alcohol, paint thinner and most solvents.